Nov.2026 18
Views: 3

Essential Maintenance Guide for SENMO Plate Rolling Machines

Introduction
SENMO plate rolling machine maintenance guide. Check cleaning, lubrication, fastening, electric and hydraulic systems for stable rolling accuracy.
Details

SENMO Plate Rolling Machine: Working Principle & Maintenance Checklist

Plate rolling machines are metal forming equipment that achieve plastic deformation of metal plates. Through the coordinated movement of upper rollers, lower rollers and side rollers, pressure is applied to the plate to roll it into the required curvature and shape. SENMO plate rolling machines are widely used in shipbuilding, pressure vessel manufacturing, pipeline engineering and steel structure processing.

Without proper maintenance, plate rolling machines are prone to mechanical part wear, hydraulic leakage, roller misalignment and other issues, which interfere with normal operation. Routine maintenance mainly includes cleaning, lubrication, fastening inspection, as well as inspection of the roller and worktable, electrical system and hydraulic system.

Cleaning

Cleaning is the basic requirement for stable operation. During long-time operation, oil stains, rust and metal scraps will accumulate on the machine. These impurities reduce heat dissipation and accelerate component wear. A full cleaning should be carried out after each shutdown.

Lubrication

Lubrication keeps rollers, transmission gears and hydraulic parts running smoothly. Check lubricant quality regularly to ensure grease is evenly supplied to all moving parts and prevent premature wear.

  • Check the oil level of lubricating oil or grease; the oil level of the reducer should stay at the middle line of the sight window.
  • Check manual lubrication points including guide rails and gear meshing positions for oil shortage.
  • Remove impurities inside lubrication pipelines to avoid blockage.

Worktable and Rollers

The status of rollers and worktable directly affects the rolling quality.

  • Clear metal scraps and oxide scale on roller surfaces to avoid scratching plates.
  • Test the flatness of worktable guide rails with a spirit level; the allowable deviation is ≤0.1 mm/m.

Fastening Inspection

Fastener condition is closely related to equipment safety. As operating time increases, connecting parts may loosen under vibration. Loose connections reduce rolling accuracy and bring safety risks.

  • Inspect all fasteners regularly, focusing on bolts and nuts of roller bearing seats and drive shaft connections.
  • Recheck torque values with a torque wrench and retighten according to requirements when looseness is found.

Electrical System Maintenance

  • Check motors, cables and controller terminals to confirm firm connections and inspect for damage or aging.
  • Keep the electric cabinet clean to prevent short circuits caused by dust and debris.

Hydraulic System Maintenance

  • Replace hydraulic oil periodically to remove impurities and metal particles that wear hydraulic components.
  • Check the seals of hydraulic cylinders to eliminate leakage.
  • Clean hydraulic valves and pipelines regularly to prevent blockage and leakage and maintain stable hydraulic performance.

Summary

Standard maintenance can reduce unexpected failures, extend the service life of SENMO plate rolling machines and maintain stable forming precision. Follow the above inspection checklist for daily and periodic maintenance to keep your plate rolling machine in good working condition.

Leave a Message
First Name*
Last Name*
Email*
Whatsapp/Phone
Message*
Country/Region*
We use Cookie to improve your online experience. By continuing browsing this website, we assume you agree our use of Cookie.