Drill bit re-sharpener
This machine is portable, accurate and durable, equipped with diamond grinding wheel made in Taiwan.
It can sharpen the tip angle (apex angle), front cutting edge (positive rake angle) and chip flute (rear angle) of the drill bit. It can replace the center drill for more accurate positioning, easier chip evacuation and easier drilling.
For three-slope drill bits, internal cooling drills, powder metallurgy drills, etc.
|
Model |
TX-S20 |
|
Grinding diameter |
3-20mm |
|
Point angle |
118°-140° |
|
Power |
AC 220V |
|
Motor |
180W/4800rpm |
|
Grinding wheel |
CBN or SDC |
|
Dimension |
43x22x21cm |
|
N.W. |
17kg |
|
|
|
|
Note: Standard collet: 18 pieces; standard wheel: CBN. |
|
|
It is not easy to align below 3mm. |
|
